Skip to main content

Ideate Stage

The ideate stage of the design thinking process has the power of infinite possibilities. We start to define the problem and then develop human-centric solutions. It's a process of developing innovative solutions on paper through sketches. This stage of the design thinking process excites me as we get to do the part that product designs are made for - solving problems. I drew few thumbnail sketches and then developed 5 among them on the Ideate worksheet.

My problem statement is to design furniture for waiting areas having limited space where the seating maintains proper social distancing. I further developed solutions through 5 concept sketches. Sketch 1 is a chair with a wooden seat, metal base and legs and, a partition with a translucent cloth. Sketch 2 has a shutter-style partition by the side which can be folded down when not in use This chair can be used post covid where the users can decide if they want the shutter up or down. Sketch 3 is capsule-shaped furniture that has 3 sides covering the person. Sketch 4 has wooden block seating with an L-shaped partition. Finally, sketch 5 is a bench design with a glass partition in the middle over a table-like structure which can be used to keep your belongings or a person can sit on the table part and keep their laptop on the seat portion to work too. 

It's best to think of the Ideate stage as a space where we can open possibilities. It's crucial to bring your ideas forward as you transition from identifying problems to generate potential solutions.

Do tell me in the comment section below which concept sketch among the 5 do you prefer. Any additional suggestions are welcomed. Your feedbacks are valuable to me. Thank you for reading my blog.

Comments

  1. Ng Ee ShiungJune 30, 2021 at 9:14 PM

    Great update! I like your sketches they are neat!

    ReplyDelete
  2. Mostafa MarzoukJuly 3, 2021 at 5:42 AM

    Nice variety of ideas!

    ReplyDelete
  3. Kenneth SandersonJuly 5, 2021 at 2:45 AM

    You've got a couple of nice ideas there! I personally like idea 4 the most, something about it seems inviting to me and the partition looks to be the easiest to maintain. Cloth can get dirty easily and glass can scratch. The shutter partition might need more maintenance for it to work and that might add to the cost overall cost. The capsule one seems interesting but it looks a little bit too confined. It might induce claustrophobia to some people.

    ReplyDelete
    Replies
    1. Anushka PuniyaniJuly 7, 2021 at 1:21 PM

      Hello Kenneth!! Thanks for some great feedback. I totally agree with your points.

      My interviewee had a similar feedback and he liked the idea 4 as well.

      I'll be Iterating into it so do visit again to discover my concept development for thumbnail sketch 4.

      Your feedback was very helpful. Thanks again! :)

      Delete

Post a Comment

Popular posts from this blog

TEST- understand, observe, visualize and iterate.

  Testing, in Design Thinking, involves generating user feedback as related to the prototypes you have developed, as well as gaining a deeper understanding of your users.  Testing is the chance to get a product out into the world and test it in real-time. During this phase, you have a chance to see if you’ve framed the problem correctly.  Above is my recording and evaluation from the user testing. The user seems satisfied with the product and didn't have much to offer when it came to concluding drawbacks. Therefore I had to closely observe the user interaction to identify the points of improvement.  Thank you for reading my blog. Do share your views on the testing stage in the comment section below.
Post a Comment
Read more

Build - Prototyping Stage

Prototype improves the overall understanding of the design. A rapid prototype helps to illustrate the final product, allowing to comprehense the product's function and target audience. A slight shift in proportions can make a huge difference and completely change the look and function of a product. Every product has a target audience, and at the end of the day, the target audience is going to have the final say. Prototypes allow user testing, which improves designs with valuable feedback about the product. Below is my prototype which is built to understand the arrangement and stability of the design. I used cardboard and translucent pannels to build the prototype. Through rapid prototyping, I identified few issues with the design. The wood logs which are substituted with cardboard are not supported when they meet the polycarbonate partition. For the solution, metal joints can be attached to support and fix the logs with the partition. Thank you for reading my blog. Do share your fe...
Post a Comment
Read more

Week 3 - Design Challenge

In this semester, we are given the topic to design (solution and process) something which is helpful and plays a vital role in the health and wellness of a world in need. The design may include any type of design that helps people stay safe, connect with others, and face the challenges ahead. There were three sub-topics to choose from. I choose Human-Centric Principle: Product/Industrial/Furniture design. I decided to design furniture that is comforting and embraces social distancing. The worldwide spread of COVID-19 has affected our daily lives and has changed our way of living. Being safe is now the fundamental need of the hour. Our whole idea of living, working, and going out is now distinct and social distancing, isolation, and being self-sufficient is now the new normal. The world is now slowly adapting to life amidst the pandemic and designers are rethinking ways to provide designs and innovations that fits the new world. To design furniture for the covid-19 pandemic, I needed to...
Post a Comment
Read more